The MikroTik CubeG-5ac60aypair, also known as the Wireless Wire Cube Pro, is a pre-configured point-to-point wireless kit that includes two Cube 60Pro ac devices. Built on the 802.11ay standard, it offers ultra-fast 60 GHz links with automatic 5 GHz failover. The units are compact, weather-resistant, and ready to deploy with virtually no configuration required—ideal for linking two buildings with fiber-like speeds. General Specifications Product Name: CubeG-5ac60aypair Product Type: Preconfigured 60 GHz Point-to-Point Wireless Kit Architecture: ARM 32-bit CPU: Qualcomm IPQ-4019 (Quad-core ARM Cortex-A7) CPU Frequency: Auto-scaled, typically around 716 MHz RAM: 256 MB Storage: 64 MB NAND Operating System: RouterOS RouterOS License Level: Level 4 (supports PtP bridging and advanced features) MTBF: Approximately 200,000 hours at 25°C Operating Temperature: –40°C to 70°C Dimensions (each unit): ~115 × 95 × 82 mm IP Rating: IP54 (dust and splash resistant) Cooling: Passive (fanless design) Wireless Specifications 60 GHz (Primary Link): Standard: IEEE 802.11ay (backward compatible with 802.11ad) Antenna Type: Integrated high-gain directional antenna Antenna Gain: Approximately 32 dBi Beamwidth: ~5° (narrow beam for focused point-to-point communication) Max Throughput: Up to 2 Gbps full-duplex Max Distance: Up to 1,200 meters (depending on environmental conditions) EIRP: Up to 40 dBm Modulation: QPSK / 16-QAM / 64-QAM 5 GHz (Backup Interface): Standard: 802.11a/n/ac Data Rate: Up to 433 Mbps (single chain) Antenna Gain: 11.5 dBi Function: Automatic failover for link redundancy Networking & Interfaces Ethernet: 1 × 10/100/1000 Mbps Ethernet per unit Protocols Supported: IPv4, IPv6, VLAN, DHCP, NAT, VPN, OSPF, BGP, firewall, and more Management: Winbox, WebFig, CLI (SSH/Terminal), SNMP, API Encryption & Security: WPA2, AES, firewall rules, IP filtering GPS Module: Built-in GPS for synchronization (time/frequency coordination in multipoint setups) Power & Electrical Power Input: Passive PoE or 802.3af/at PoE Supported Voltage Range: 18 V – 48 V Power Consumption: Up to 13 W per device Included Power Supplies: 2 × PoE injectors and power adapters Power Connector: Via Ethernet only (no DC barrel input) Mounting & Physical Mounting Options: Includes hose clamp and metal bracket for pole mounting Design: Durable cube-shaped enclosure with UV-stabilized plastic and aluminum heat sink Color: White with MikroTik logo Weight (each unit): Approximately 500 g Kit Contents 2 × Cube 60Pro ac devices (pre-paired) 2 × 24 V 0.8 A PoE injectors 2 × Power adapters 2 × Precision metal mounting brackets with hose clamps Quick start guide Ideal Use Cases Wireless fiber alternative between two office buildings High-speed video backhaul for security or broadcasting Short-range enterprise connectivity Campus or data center interlinks Disaster recovery and temporary high-capacity links Meta Description: MikroTik CubeG-5ac60aypair (Wireless Wire Cube Pro) is a plug-and-play point-to-point wireless kit with two Cube 60Pro ac units, offering 60 GHz 802.11ay full-duplex speeds, 5 GHz failover, GPS sync, and passive cooling for secure, ultra-fast building-to-building links. Datasheet
